ISC 2007, JUNE 11-13, 2007, DELFT UNIVERSITY OF TECHNOLOGY, DELFT,

------------ISC 2007, JUNE 11-13, 2007, DELFT UNIVERSITY OF TECHNOLOGY, DELFT,
THE NETHERLANDS, PRELIMINARY PROGRAMME------------

Dear Colleague,

please find enclosed the list of accepted presentations at ISC2007, June 11-13,
Delft University of Technology, Delft, The Netherlands.

For more information about the conference and to register as a participant
please go to:
http://www.eurosis.org/cms/?q=node/176

Regards
Philippe

Keynote Speech

Simulation and Verification of Timed and Hybrid Dynamical Systems
dr.ir. Bert D.A. van Beek, Eindhoven University of Technology, Eindhoven, The
Netherlands

Workshop

scMod/Sim.exe: A Modeller and Dynamic Simulator for Supply Chain Systems
Feliz Teixeira, University of Porto, Porto, Portugal
Industrial Presentations

ESI and its solutions for Virtual Prototyping and Virtual Manufacturing
Matteo Palmonella, ESI Group

More industrial presentations to follow

METHODOLOGY
Metaknowledge Simulation

METH-05
Hard and Soft Approaches in a Simulation Meta-Knowledge
László Muka, Elassys Consulting Ltd. Budapest and Gábor Lencse, Széchenyi
István University, Gyor, Hungary

HOSLOGIS-05
A Clinical Decision Metaknowledge Model
Joël Colloc and Marie-Hélène Cuvelier, Université Lyon2, LEACM, ISH, Lyon,
France and Peter Summons, The University of Newcastle, Callaghan, Australia

HOSLOGIS-01
Medical and Pharmaceutical Experiences: Knowledge Discovery with Strategy by
Vote
Claude Dussart, François-Xavier Magaud and Claude Petit, University Claude
Bernard and the Military Hospital Desgenettes, Lyon, France

HOSLOGIS-02
Experimental Study with Metrics Indicating the Interpretation of Clinical
Guidelines
Peter Summons, The University of Newcastle, Callaghan, Australia and Joël
Colloc, Université Lyon2, Lyon, France
Kriging Methodology

COMPLEX-07
Performance Evaluation of the Evolution Control in design Optimization assisted
by Kriging Surrogates
Gabriella Dellino, Universita degli Studi di Bari, and Paolo Lino, Carlo
Meloni, Alessandro Rizzo, Politecnico di Bari, Bari, Italy

METH-09
Modeling of water pressure distribution in water nets using the kriging
algorithms
Lucyna Bogdan, Jan Studzinski, Systems Research Institute Polish Academy of
Sciences, Warsaw, Poland
COMPLEX SYSTEMS SIMULATION
Complex Systems Simulation Methodology

COMPLEX-02
Finding Relationships that are Functions
William Conley, University of Wisconsin at Green Bay, Green Bay, Wisconsin,
U.S.A.

COMPLEX-05
A Discrete Model for the Dynamics of Sandpile Surfaces
Ignacio Garcia-Fernandez, Marta Pla-Castells, Rafael J. Marti?nez-Dura,
Universitat de Valencia, Valencia, Spain

METH-07
Secondary Nucleation Study of Sucrose Crystallization: Experiments and Modeling
S Ouiazzane, B.Messnaoui, T.Bounahmidi Université Mohammed V Agdal, Rabat,
Morocco and J Wouters, Faculté Universitaire de N.D de la Paix, Namur, Belgium
Software Model Development

COMPLEX-01
A Component Framework for the Development of Complex Simulators
José A. Dianes, Manuel Díaz, Daniel Garrido and Enrique Soler, University of
Málaga, Málaga, Spain

COMPLEX-03
Modeling Complex Systems using the Web Ontology Language (OWL)
Tobias Lehmann and Andreas Karcher, Universität der Bundeswehr München,
Neubiberg, Germany
Human Behavioural Modelling

WEB-03
Multimodal Web based system for human emotion recognition
Dragos Datcu, L.J.M. Rothkrantz, Delft University of Technology, Delft, The
Netherlands

METH-03
Christiansen Grammar Evolution for the Modelling of Psychological Processes
Emilio del Rosal, Alfonso Ortega, Manuel Alfonseca and Marina de la Cruz
Electronic Data Simulation

METH-02
Principles of Transparent Parallelizing of Cluster Computing
Vitaliy Pavlenko and Victor Burdejnyj, Odessa National Polytechnic University,
Odessa, Ukraine

ELEC-02
Rare Event Simulation with Tandem Jackson Networks
Dimitar Radev, University of Rousse, Rousse, Bulgaria and Izabella Lokshina,
SUNY Oneonta, Oneonta, USA

AUTO-01
A new Approach for lossless Data Compression using arithmetic Coding and
continued Fraction
Atef Masmoudi and Mohamed Salim Bouhlel, Higher Institute of Biotechnology,
Sfax Tunisia
MANUFACTURING SIMULATION
Steel Manufacturing Simulation

MANUF-07
Process Automation Tools development for Sheet Metal Hydroforming Simulation
Antonio Del Prete, Alfredo Elia, Teresa Primo and Barbara Manisi, University of
Salento, Lecce, Italy

MANUF-08
Detailed Model of Spot Welded Joints to simulate the Dynamical Failure of Car
Assemblies
Emmanuel H.J. Lamouroux and Falke Seeger, DaimlerChrysler AG, Sindelfingen,
Germany, and Daniel Coutellier, L.A.M.I.H. UMR CNRS 8530, University of
Valenciennes, Valenciennes, France
Grinding and Milling Simulation

ENG-01
A Study on the Development of High Precision Cam Profile CNC Grinding Machine
with Maximum Grinding Speed to obtain Constant Surface Roughness
Younghwa Roh, Sangheon Lim, Sunghwan Ahn, Choonman Lee and Jongyun Jung
Changwon National University, Kyeongnam and Sangdae Yoon, Fine Ace Technology
Co. Lt, Kyeongnam, South Korea

ENG-06
Advanced Kinematic Geometrical Model of Grinding Processes
Blazej Balasz and Tomasz Królikowski, Koszalin University of Technology,
Koszalin, Poland

ENG-02
A Study on the effect of Surface Roughness and cutting Force in MQL End Milling
Su Hyun Park, Jong Yun Jung, Choon Man Lee, Young Kug Hwang, Changwon National
University, Gyeongnam, South Korea
ROBOTICS SIMULATION
Servo-engine Simulation

ENG-03
Informatics platform for determining the dynamic performances of a two stages
servo valve
Alexandru Marin, University Politehnica, and Petrin Drumea, Marian Blejan and
Ioana Ilie, Hydraulics and Pneumatics Institute, Bucharest, Romania

ENG-04
Optimization of Electro-Hydraulic Systems using Mechatronic Concepts
Alexandru Marin, University Politehnica and Petrin Drumea and Adrian Mirea,
Hydraulics and Pneumatics Institute, Bucharest, Romania
Error Detection Simulation

MANUF-03
Online Errors Identification in Multi-Axis Machines for Adaptive Compensation
Abderrazak El Ouafi and Nourredine Barka, University of Montreal at Rimouski,
Rimouski, Canada

ROBO-09
On-line Simulation Based Fault Detection for a Hydraulic Driven Industrial
Robot
C. Angeli, Technological Institute of Piraeus and A. Chatzinikolaou, Athens,
Greece
Robot Navigation Simulation

ROBO-01
Hybrid Neuro-Fuzzy System for Mobile Robot reactive Navigation
Munaf S. N. Al-Din and Ahmed A. Abdullah, Tafila Technical University, Tafila,
Jordan

ROBO-07
Particle filter-based localization of simulated mini-rovers with low-cost IR
sensors
Fabrizio Abrate, Basilio Bona and Marina Indri, Politecnico di Torino, Torino,
Italy
Validation and Analysis in Robotics

ROBO-02
Modelling and Validation of a 1DOF Arm Powered by Pneumatic Muscles
Aron Pujana-Arrese, Javier Arenas, Leire Maruri, Ana Martinez-Esnaola and
Joseba Landaluze, IKERLAN Research Centre, Arrasate/Mondragon, Spain

ROBO-04
Modeling, Stress Analysis and Design of an Underwater Remotely Operated Vehicle
(ROV)
Ahmad Bagheri, Shahed Aliakbar and Salar Basiri, Guilan University, Rasht, Iran
AUTOMOTIVE SIMULATION

AUTO-02
A Concept of an Integrated Suspension Control Logic Architecture and its
Testing
Grzegorz Slaski, Politechnika Poznanska, Poznan, Poland

AUTO-04
Simulation of adaptive restraint Systems for frontal Crash
J. Richert, C. Götz, DaimlerChrysler AG, GR/EAA, Sindelfingen, Germany and D.
Coutellier, LAMIH-University of Valenciennes, Valenciennes, France

AUTO-03-MIL
Numerical Simulation of Vehicle Platoon Aerodynamics
Marek Maciejewski and Ewa Narbuntowicz, Politechnika Poznańska, Poznań,
Poland
MATERIALS HANDLING, LOGISTICS AND TRAFFIC SIMULATION
Production Scheduling and Materials handling

MANUF-02
Implementing an Evolutionary Algorithm for Production Scheduling in a Cardboard
Corrugated Fabrication Plant
Fabian Vargas-Nieto Finotex Colombia S.A. Barranquilla and Jairo R.
Montoya-Torres, Universidad de La Sabana, Chía, Colombia

LOGIS-09-MANUF
Design and Implementation of a Bi-Objective EA-Based Scheduling Strategy: Case
Study in Thermal Printed Label Manufacturing
Fabian Vargas-Nieto, Finotex Colombia S.A., Barranquilla, and Jairo R.
Montoya-Torres, Universidad de La Sabana, Chía, Colombia

MANUF-04
Simulating Wireless Monitoring in Automated Maintenance of Belt Conveyor
Systems
S. Güngen, A. Lopez de la Cruz, H. P.M. Veeke, G. Lodewijks, Delft University
of Technology, Faculty 3mE, Delft, The Netherlands

MANUF-01
Performance Evaluation of Lot Dispatching and Automated Material Handling
Approaches by Discrete Event Simulation
René Drießel and Lars Mönch, University of Hagen, Hagen, Germany
Production Efficiency Improvement

MANUF-11
Model and simulation of a Gas Cookers Assembly Line: Performance Analysis and
Suggestions to increase Efficiency
Giovanni Andrioli and Giorgio Romanin-Jacur, University of Padova, Vicenza,
Italy

MANUF-06-ELEC
Simulation based Planning of Capacity Increase for the Production of Lithium
Polymer Batteries
Claus-Burkard Boehnlein, University of Wuerzburg, Wuerzburg, Germany and
Christian Sahr, Bullith Batteries AG, Itzehoe, Germany

ELEC-03
Accelerating SoC Design using SysML and SystemC1
Waseem Raslan, Mentor Graphics Egypt and Ahmed Sameh, The American University
in Cairo, Cairo, Egypt
Scheduling Optimization and Analysis

LOGIS-01
Simulation Based Optimization of Agent Scheduling in Multiskill Call Centers
Athanassios N. Avramidis, Michel Gendreau, Pierre L’Ecuyer, Universite de
Montreal, Montreal, Canada and Ornella Pisacane, Universita della Calabria,
Arcavacata di Rende (CS), Italy

HOSLOGIS-03
Modelization and analysis of trajectories in medical simulations
François-Xavier Magaud, Claude Dussart, and Claude Petit, University Claude
Bernard and the Military Hospital Desgenettes, Lyon, France
Urban and Motorway Traffic Simulation

LOGIS-06
Urban Traffic Systems - Proposition and application of generic components
Michelle Chabrol, Michel Gourgand, Damien Hostin, Patrice Leclaire, LIMOS,
Universite Blaise Pascal, Aubiere Cedex, France

LOGIS-02
Neural Network Microsimulation of Motorway Traffic
Abs Dumbuya, George Lunt, Jill Weekley, Anna Booth and Andrew Lewis, TRL,
Wokingham, United Kingdom
Traffic and Logistics Case Studies

LOGIS-04
Simulation Modelling of Airport Passenger Operations: An Improvement Case Study
Martin S. Barber, CORAS, University of Salford, Salford, and Peter Durie,
Manchester Airport Group, Manchester, United Kingdom

LOGIS-07
Bulk Terminal modelling and simulation
Jaap A. Ottjes and Gabriel Lodewijks, Delft University of Technology, Delft,
The Netherlands

HOSLOGIS-04
Simulation of a Holding Unit between First Aid Center and Specialty Wards: A
Case Study
A.C. van Bruggen, H.P.M. Veeke, G. Lodewijks, Delft University of Technology,
Delft, and F.K. van Lambalgen, Leiden University Medical Center, Leiden, The
Netherlands
VR IN DESIGN AND MANUFACTURING
Product Design with VR

VIR-05
Virtual Ergonomics Analysis to Validate Product Design
Giorgio Colombo, Politecnico di Milano, Milano, Italy and Demis Bronco,
Caterina Rizzi and Daniele Regazzoni, Università degli Studi di Bergamo,
Dalmine (BG), Italy

VIR-07
A Simulator of Agent-Based Household Appliances
Konrad Steblovnik, Gorenje d.d., Velenje, Slovenia and Damjan Zazula,
University of Maribor, Maribor, Slovenia

VIR-02
Visualization for an Augmented Reality Construction Machinery Simulator
Alvaro Segura and Aitor Moreno, VICOMTech San Sebastian, Spain, and Gino
Brunetti and Thomas Henn, Fraunhofer IGD, Darmstadt, Germany
Virtual Manufacturing Simulation

VIR-01
A Virtual Manufacturing Environment for Interoperability Testing
Charles R. McLean, Sanjay Jain, Andre Craens, and Deo Kibira, National
Institute of Standards and Technology (NIST), Gaithersburg, USA

MANUF-10
A Software Simulator for Steel Plant
O. Barbarisi and C. Del Vecchio and G. Palmieri and A. Parisio, Universita
degli Studi del, Sannio, Benevento, Italy

VIR-04
A reconfigurable Desktop Virtual Flexible Manufacturing Cell
Haslina Arshad and Riza Sulaiman Universiti Kebangsaan Malaysia, Bangi and
A.M.S. Hamouda and Napsiah Ismail, Universiti Putra Malaysia, Selangor,
Malaysia
COMMUNICATIONS MODELLING AND SIMULATION

METH-01-ELEC
Modular Approach Based Decision Support for Communication Systems
Calin Munteanu, Simona Caramihai, Janetta Culit, Politehnica” University of
Bucharest, Bucharest, Romania

METH-04-TRAF
Combination and Interworking of Four Modelling Methods for Infocommunications
and Business Process Modelling
Gábor Lencse, Széchenyi István University, Gyor and László Muka, Elassys
Consulting Ltd. Budapest, Hungary

ELEC-01
Modeling and Simulation of Self-Similar Teletraffic
Dimitar Radev, University of Rousse, Rousse, Bulgaria, Izabella Lokshina, SUNY
Oneonta, Oneonta, USA
NUCLEAR ENERGY SIMULATION

ENERG-03
Using Web Services in Nuclear Power Plant Simulators
José A. Cortés, Manuel Díaz, Daniel Garrido, Isabel Parrado and Enrique
Soler, University of Málaga, Málaga, Spain

ENERG-01
Instrumentation and Control System Renewal using Simulation at PAKS Nuclear
Power Plant
János Sebestyén Jánosy, MTA KFKI Atomic Energy Research Institute, Budapest,
Hungary

ENERG-02
Real-Time System for a Heavy Water Detritiation Plant
Florin Hartescu, National Institute for R&D in Informatics, Bucharest, Romania
PETROCHEMICAL ENGINEERING

PET-01
Using a Generic Methodology to Develop a Simulation Model of a Petrochemical
Plant
Martin Albertyn and Paul S Kruger, University of Pretoria, Pretoria, South
Africa

PET-02
Calculation of asphaltene precipitation onset by quantum mechanics and modified
Virial EOS
S. Sabbaghi, M.M.Zerafat, College of petroleum and Chemical Engineering, Shiraz
University, Iran

PET-03
Modeling and simulation of a drilling well, application to stick-slip
Masoud Najafi, INRIA-Rocquencourt, Le Chesnay, and Zakia Benjelloun-Dabaghiy
and Isabelle Rey-Fabrety, Institute Francais du Petrol, (IFP), Rueil-Malmaison,
France
MILITARY OPTIMIZATION AND RISK ASSESSMENT

MIL-01
Using a Simulation Model to determine the optimum Number of Pilots in an Air
Force
Martin Albertyn, Defence Institute, a Division of Armscor Business (Pty.) Ltd.,
Pretoria, South Africa and Stephen D Trichard, South African Air Force,
Pretoria, South Africa

MIL-02
Scenario Modeling in Environmental Monitoring and Civil Protection Applications
Alexander Sabov, Gerhard Schreck, Jörg Krüger, Fraunhofer Institute for
Production Systems and Design Technology, Berlin, Germany

MIL-03-LOGIS
Safety/Security Management Model supporting Hazard Identification and Risk
Assessment in the Air Traffic Services
Tomas Feglar, International Consultant in Information Systems Research and
Architecture, Prague 6, Czech Republic
TEXTILE SIMULATION
Modelling of Textile Structures

TEX-02
NTER Fiber Frictional Model in The Cotton Sliver
Shahram Nowrouzieh, Artan Sioimeri and Jean-Yves Drean, ENSISA-UHA, Mulhouse
Cedex, and Richard Frydrich, Jean-Paul Gourlot, CIRAD-CA, TA 70/16,
Montpellier, France

TEX-05
Finite Element Modelling of the Warp Knitted Structure
Argyro E. Kallivretaki and Christofer G. Provatidis National Technical
University of Athens, Savvas G. Vassiliadis, Technological Education Institute
of Piraeus, Greece and Mirela V. Blaga, Gh. Asachi Technical University, Iasi,
Romania

TEX-06
Introduction to Modelling of Virtual Garment Design in 3D
Agnieszka Cichocka, Technical University of Lodz, Lodz, Poland and Pascal
Bruniaux and Vladan Koncar, (GEMTEX), UPRES EA2161, École Nationale des Arts
et Industries Textiles (ENSAIT), Roubaix, France

VIR-03-TEX
Interactive Visualisation of Simulated Nonwoven Fabrics
Carlo Moritz Göllner, Alvaro Segura and Aitor Moreno, VICOMTech, San
Sebastián, Spain and Stefan Wundrak and André Stork, Fraunhofer IGD,
Darmstadt, Germany
Smart Textiles Modelling and Development

TEX-01
Textronics Device for Measuring the Breathing Rhythm
Janusz Zilba and Michal Frydrysiak, Technical University of Lodz, Poland

TEX-03
Textile Magnetic Core
Janusz Zilba, Technical University of Lódz, Lódz, Poland

TEX-04
Textronic Model of Clothing considering changes in its Thermoinsulating
Properties
Michal Frydrysiak, Stefan Ziegler, Krzysztof Gniotek, Technical University of
Lódz, Lódz, Poland
Modelling for Evaluation and Prediction

TEX-07
Evaluation Textile Fabrics Color Difference by Scanner
A.Shams-Nateri Assistant Professor, Textile Engineering Department, Guilan
University, Rasht, Iran

TEX-09
User Friendly Permeability predicting Software for Technical Textiles
B. Verleye, S.V. Lomov and D. Roose, K.U.Leuven; Leuven and G. Morren and H.
Sol, Vrije Universiteit Brussel, Brussels, Belgium

TEX-08
Predicting Yarn Tenacity using Soft Computing Techniques
Ting Chen, Xia Chen and Liqing Li, Donghua University, Shanghai, China

TEX-10
Modelling the Agility in the Apparel Industry
Antonela Curteza and Adela Florea, “Gh. Asachi” Technical University of
Iasi, Iasi, Romania

--
Philippe Geril               Tel: +32.9.264.55.09
EUROSIS -ETI                 Fax: +32.9.264.58.25
Ghent University             E-mail: philippe.geril@eurosis.org
Dept.of Industrial Mgmt.     E-mail: pgeril@yahoo.co.uk
Technologiepark 903          URL: http://www.eurosis.org
Campus Ardoyen
B-9052 Ghent-Zwijnaarde
Belgium
*********************************************************************
*               Your Scientific information site on                 *
* Computer Simulation - Concurrent Engineering - Multimedia- Games  *
*                          WWW.EUROSIS.ORG                          *
*********************************************************************

**** DISCLAIMER ****
"This e-mail and any attachments thereto may contain information
which is confidential and/or protected by intellectual property
rights and are intended for the sole use of the recipient(s) named
above.
Any use of the information contained herein (including, but not
limited to, total or partial reproduction, communication or
distribution in any form) by persons other than the designated
recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender
either by telephone or by e-mail and delete the material from any
computer.
Thank you for your cooperation."

=======================================================================
This email is sent out to all those on the EUROSIS-ETI database.If
you want to be removed from this database or want to update your
address details, please send an email to Philippe.Geril@eurosis.org
=======================================================================